T O P I C R E V I E W |
Sunbeam-mike |
Posted - 01 May 2019 : 13:28:21 Just a quicky, if you don't mind.
What are the bolts that hold the front bumper brackets to the body?
I need slightly longer ones. My bolts had no spacers and were holding the brackets against the body. Now I've made spacers they are too short.
The ones I took out are M12. surely that's not right?
1/2" UNF don't fit the thread is far to fine.
Thanks
Mike Hooper |
4 L A T E S T R E P L I E S (Newest First) |
Sunbeam-mike |
Posted - 15 May 2019 : 21:30:30 For future reference, yes they are unf: The M12 had damaged the unf thread.
Mike Hooper |
JPSH120 |
Posted - 01 May 2019 : 16:17:42 I'll have to check the length for you if I can get in there and measure them!
|
Sunbeam-mike |
Posted - 01 May 2019 : 13:32:54 That was quick!
Front bumper.
Maybe i made the spacers too long. (2"?)
Mike Hooper |
JPSH120 |
Posted - 01 May 2019 : 13:30:13 Front or rear bumper?
It's been a while since i did mine but I only remember spacers on the front and even then the brackets still sit very close to the bodywork. |