Hi Ian, All replaced and working fine- apologies for late reply! ATB David
quote:Originally posted by IanEndurer
Hi David,
Yes that's correct the bottom is to master and top is bleed nipple. Fairly straightforward to fit- remove rod from clutch arm(held on by split pin) then undo master feed then remove 2 fixing bolts- assembly is reversal of removing. Simply bleed system a d enjoy light clutch feel! Good luck. Ian.
Yes that's correct the bottom is to master and top is bleed nipple. Fairly straightforward to fit- remove rod from clutch arm(held on by split pin) then undo master feed then remove 2 fixing bolts- assembly is reversal of removing. Simply bleed system a d enjoy light clutch feel! Good luck. Ian.
Hi there, Just moved house and can't find my workshop manual- Need to replace the clutch slave cylinder and wondered if there are any obvious snags- replacement sent by speedy spares is approx 3" overall in length with 2 horizontal screw fittings at rear, assume top for bleed nipple and bottom for pipe from master. All advice gratefully received! David
H120 clutch slave cylinder replacement
Posted - 05 Aug 2022 : 10:35:45
