| T O P I C R E V I E W |
| JonandJude |
Posted - 12 May 2015 : 08:11:44
Hi all, after polybushing the complete front end my fastback is driving much nicer but the one thing I still need to source is a replacement polybush for the steering idler link arm.
I'm sure I saw a supplier while I was shopping before but can't find them now for the life of me.
Hopefully 1 of you guys knows where to get them.
Alternatively how straightforward is it to replace with a slave steering box?
Any suggestions?
Thanks
Jon
1972 Rapier H120
 |
| 3 L A T E S T R E P L I E S (Newest First) |
| JonandJude |
Posted - 31 May 2015 : 22:10:51
The poly bushes came from Lark speed who unfortunately don't list one for the steering I've found this www.supereflex.co.uk/proddetail.php?prod=SF320-715K listed for the sunbeam tiger, alpine, rapier etc but suspect this is for the earlier cars?
The kit contains 2 bushes?
1972 Rapier H120
|
| JonandJude |
Posted - 12 May 2015 : 10:43:02
The poly bushes came from Lark speed who unfortunately don't list one for the steering I've found this www.supereflex.co.uk/proddetail.php?prod=SF320-715K listed for the sunbeam tiger, alpine, rapier etc but suspect this is for the earlier cars?
The kit contains 2 bushes?
1972 Rapier H120
|
| JPSH120 |
Posted - 12 May 2015 : 09:10:33
Hi Jon
Perhaps you could just get one that is the correct size/dimensions from one of the regular suppliers?
I'm assuming that is where you sourced the others from?
As for a slave box, it has been done. Gordon Jarvis has done it on his H120 and noted an improvement. You need a lhd box, if you can find one ;)
___________________________________________________________________________
 |
