| T O P I C R E V I E W |
| jabe1807 |
Posted - 24 Mar 2011 : 20:29:44
Can somebody help me getting the H120 bagde on the glovebox lid,
partnr 2245745?
I also need the accelrator bracket (partnr 1241522)and bellkrank on the weber inlet manifold.
An adaptor vaccumhose to inlet manifold is also missing.
Can somebody help me i would be happy |
| 8 L A T E S T R E P L I E S (Newest First) |
| arrocuda |
Posted - 30 Mar 2011 : 16:40:23
quote:
Originally posted by jabe1807
Hi again
It would be great if you will sell it to me.
Send me a mail :jan.bekkelund@gmail.com , so you can say how I can pay you.
Regards Jan
You have mail! 
Building the 'Mark II' fastback Rapier ('Arrocuda'). |
| jabe1807 |
Posted - 28 Mar 2011 : 17:25:11
Hi again
It would be great if you will sell it to me.
Send me a mail :jan.bekkelund@gmail.com , so you can say how I can pay you.
Regards Jan
quote:
Originally posted by arrocuda
Knew I had one some where....took a little searching out but I was pretty certain it was in there.
Has the bellkranck too! Looks a lot smaller in real life but can't figure out how to resize the pic 
Building the 'Mark II' fastback Rapier ('Arrocuda').
|
| arrocuda |
Posted - 27 Mar 2011 : 20:12:52
Knew I had one some where....took a little searching out but I was pretty certain it was in there.
Has the bellkranck too! Looks a lot smaller in real life but can't figure out how to resize the pic
Building the 'Mark II' fastback Rapier ('Arrocuda'). |
| jabe1807 |
Posted - 26 Mar 2011 : 16:58:33
Hi
Yes it is nr 17. I took the word from the partsbook!
It would be great if you have these parts. I have bought manifoild and webers without these parts.
Regards Jan
quote:
Originally posted by arrocuda
quote:
Originally posted by 1922
Number 17 on this picture?
Gotcha! Pretty certain it has the crank on it. I'll try to get down the lockup and check it out.
Building the 'Mark II' fastback Rapier ('Arrocuda').
|
| arrocuda |
Posted - 25 Mar 2011 : 22:05:35
quote:
Originally posted by 1922
Number 17 on this picture?
Gotcha! Pretty certain it has the crank on it. I'll try to get down the lockup and check it out.
Building the 'Mark II' fastback Rapier ('Arrocuda'). |
| 1922 |
Posted - 25 Mar 2011 : 19:35:30
Number 17 on this picture?
 |
| arrocuda |
Posted - 25 Mar 2011 : 17:19:35
I think I've got an accelerator cable manifold bracket off of an H120 manifold somewhere, but not sure what a bellkrank is.
Tim.
Building the 'Mark II' fastback Rapier ('Arrocuda'). |
| 1922 |
Posted - 25 Mar 2011 : 12:51:24
I think the vacuum hose adapter is the same on all the Hunters, Rapiers, Sceptres etc.
You can probably get these from Speedy Spares (http://www.speedyspares.co.uk) or the guys in the Netherlands (http://www.rootesparts.com/)
Other bits might be more difficult 
|
